Rubber Seating Rings For Y-Bearings RIS207A SKF
Rubber seating rings in the RIS 2 series are primarily intended to "cushion" Y-bearings in pressed steel plummer block housings. Located on the bearing outer ring and in housing bore, they are intended to dampen vibration and noise and enable the bearings to be displaced slightly in their housings to accommodate minor shaft expansion or misalignment.
Specifications
| Principal dimensions D (mm) | 72 |
|---|---|
| Principal dimensions B1 (mm) | 19 |
| Principal dimensions C (mm) | 23 |
| Principal dimensions: D1 (mm) | 85.3 |
| Principal dimensions: r (mm) | 1.5 |
| Brand | SKF |
| UNSPSC | 31171504 |
| Principal dimensions d1 (mm) | 70.7 |
| Principal dimensions d2 (mm) | 79.7 |
There are no downloads for this product.
Rubber seating rings in the RIS 2 series are primarily intended to "cushion" Y-bearings in pressed steel plummer block housings. Located on the bearing outer ring and in housing bore, they are intended to dampen vibration and noise and enable the bearings to be displaced slightly in their housings to accommodate minor shaft expansion or misalignment.
Specifications
| Principal dimensions D (mm) | 72 |
|---|---|
| Principal dimensions B1 (mm) | 19 |
| Principal dimensions C (mm) | 23 |
| Principal dimensions: D1 (mm) | 85.3 |
| Principal dimensions: r (mm) | 1.5 |
| Brand | SKF |
| UNSPSC | 31171504 |
| Principal dimensions d1 (mm) | 70.7 |
| Principal dimensions d2 (mm) | 79.7 |
There are no downloads for this product.
