Loctite 518 x 50ml Gasketing product
LOCTITE 518 is a medium-strength sealant which cures when confined in the absence of air between close-fitting metal surfaces. Typical applications include sealing close-fitting joints between rigid metal faces and flanges. Provides resistance to low pressures immediately after assembly of flanges. Typically used as a form-in-place gasket on rigid flanged connections, e.g. transmissions and engine casings.
Your Benefits:
• Medium-strength anaerobic flange gasket
• For metal flanges
• Adapts to flange surface irregularities and scratches up to 0.25 mm
• Gel-type consistency
• Ideal for overhead application and vertical faces (no dripping)
• Seals instantly against low pressure
• P1 NSF Reg. No.: 123758
Specifications
| Brand | Loctite |
|---|---|
| UNSPSC | 31201601 |
| Chemical Basis | Acrylic |
| Colour | Red |
| Max. gap size | 0,3 mm |
| Service Temperature Range | -55 to +150°C |
| Viscosity | 15,000 mPa?s |
| Tensile shear strength in N / mm? | 7.5 |
| Fixture time steel | 25 min |
| Substrate to be sealed | Metals |
| Fixture time aluminium | 20 min |
LOCTITE 518 is a medium-strength sealant which cures when confined in the absence of air between close-fitting metal surfaces. Typical applications include sealing close-fitting joints between rigid metal faces and flanges. Provides resistance to low pressures immediately after assembly of flanges. Typically used as a form-in-place gasket on rigid flanged connections, e.g. transmissions and engine casings.
Your Benefits:
• Medium-strength anaerobic flange gasket
• For metal flanges
• Adapts to flange surface irregularities and scratches up to 0.25 mm
• Gel-type consistency
• Ideal for overhead application and vertical faces (no dripping)
• Seals instantly against low pressure
• P1 NSF Reg. No.: 123758
Specifications
| Brand | Loctite |
|---|---|
| UNSPSC | 31201601 |
| Chemical Basis | Acrylic |
| Colour | Red |
| Max. gap size | 0,3 mm |
| Service Temperature Range | -55 to +150°C |
| Viscosity | 15,000 mPa?s |
| Tensile shear strength in N / mm? | 7.5 |
| Fixture time steel | 25 min |
| Substrate to be sealed | Metals |
| Fixture time aluminium | 20 min |
